Chevrolet Cobalt Service & Repair Manual: Transmission Control Position Indicator Bulb, Replace

Chevrolet Cobalt Service & Repair Manual / Electrical / Component Replacement / Transmission Control Position Indicator Bulb, Replace

1. Remove front floor console as outlined in "Floor Console."
2. Disconnect transmission floor shift control indicator lamp electrical connector (1), Fig. 1.
3. Remove transmission control position indicator bulb (2), Fig. 1.
4. Reverse procedure to install.

Fig. 1 Transmission control position indicator bulb removal

    Tire Pressure Monitor Lamp, Diagnosis
    A visual inspection must always be performed to confirm the presence of aftermarket components, potential collision damage, or areas of concern. The Body Control Module (BC ...

    Window Regulator Motor R&R
    Front Coupe 1. Remove interior trim panel. 2. Remove water deflector. 3. Move window to full up position and ...

    See also:

    Chevrolet Cobalt Owners Manual. Rear Door Security Locks (Sedan)
    Security Lock Label shown The rear door security locks are located on the inside edge of each rear door. You must open the rear doors to access them. The label showing lock and unlock positions is located near the lock. To set the locks, do the following: 1. Insert the key into the secur ...

    Chevrolet Cobalt Owners Manual

    Chevrolet Cobalt Service Manual


    Copyright © 2025 www.cheviguide.com - Chevrolet Auto Manuals - 0.004