Chevrolet Cobalt Service & Repair Manual: Alternator, Replace
| 1. |
Disconnect battery ground cable from
battery. |
| 2. |
Remove accessory drive belt. |
| 3. |
Remove engine harness alternator connector. |
| 4. |
Remove engine harness terminal boot. |
| 5. |
Remove alternator terminal nut. |
| 6. |
Remove alternator retaining bolts and
nuts. |
| 7. |
Remove alternator from vehicle. |
| 8. |
Reverse procedure to install, noting
the following: |
| |
a. |
Torque alternator B+ terminal
nut to 15 ft. lbs. |
| |
b. |
Torque alternator mounting bolt
to 16 ft. lbs. |
|
Caution: Wear suitable eye
protection and heavy leather gloves when removing and installing pulley.
Do not remove or install pulley
with alternator in upright position.
...
1.
Disconnect battery ground cable from
battery.
2.
Raise and support vehicle.
3.
Remove starter solenoid te ...
See also:
Chevrolet Cobalt Service & Repair Manual. Fog Lamp Bulb, Replace
Warning: Halogen bulbs contain
gas under pressure. Handling a bulb improperly could cause it to shatter
into flying glass fragments. To help avoid personal injury: Turn off the
lamp switch and allow the bulb to cool before changing the bulb. Leave the
lamp switch OFF until the ...
Alternator Pulley, Replace
Starter, Replace