Chevrolet Cobalt Owners Manual: Hood Release
To open the hood, do the following.
1. Pull the interior hood
release lever with
this symbol on it.
It is located under
the instrument panel
on the driver's side
of the vehicle.
2. Then go to the front of the vehicle and push the secondary hood release lever to the left. It is located under the front center of the hood toward the driver's side of the vehicle.
3. After you have partially lifted the hood, a gas strut will automatically take over to lift and hold the hood in the fully open position.
Before closing the hood, be sure all the filler caps are on properly. Lower the hood until the lifting force of the strut is reduced, then release the hood to latch fully. Check to make sure the hood is closed and repeat the process if necessary.
Checking Things Under the Hood
WARNING:
An electric fan under the hood can start up and
injure you even when the engine is not running.
Keep hands, clothing, and tools away from any
underhood electric fan.
WARNING:
Things tha ...
Engine Compartment Overview
When you open the hood on the 2.2L L4 engine, here is what you will see:
A. Engine Air Cleaner/Filter (2.0L Turbo Engine) or Engine Air Cleaner/Filter
(2.2L Engine).
B. Engine Oil Fill Cap. See â ...
See also:
Chevrolet Cobalt Service & Repair Manual. Description
AC-Delco Tandem Diaphragm Type
This unit utilizes a vacuum power
chamber, consisting of a front and rear shell, housing divider, front and
rear diaphragm, plate assemblies, hydraulic pushrod and a diaphragm return
spring, Fig. 1.
In normal operating mode, with
se ...
Chevrolet Cobalt Owners Manual
- In Brief
- Seats and Restraint System
- Features and Controls
- Instrument Panel
- Driving Your Vehicle
- Service and Appearance Care
- Maintenance Schedule
- Customer Assistance Information
Chevrolet Cobalt Service Manual
- Air Bags
- Air Conditioning & Heater
- Body & Frame
- Brakes
- Cooling System
- Driveline
- Electrical
- Electronic Stability Controls
- Engine Service
