The engine oil life system calculates engine oil life based on vehicle use and displays a DIC message when it is necessary to change the engine oil and filter.
The oil life system should be reset to 100% only following an oil change.
Resetting the Oil Life System
1. Turn the ignition to ON/RUN, with the engine off.
2. Press the DIC information and reset buttons at the same time to enter the personalization menu.
3. Press the information button until the DIC display shows OIL-LIFE RESET.
4. Press and hold the reset button until the DIC display shows ACKNOWLEDGED.
5. Turn the key to LOCK/OFF.
See Engine Oil Life System.
Chevrolet Cobalt Service & Repair Manual. Ball Joint, Replace
Front
1.
Remove control arm.
2.
Secure control arm in a suitable vise.
3.
Drill out three rivets retaining ball
joint to lower control arm. Install a 1/8 inch bit in order to make
a pilot hole through ...