Chevrolet Cobalt Service & Repair Manual: Crankshaft Damper R&R

Chevrolet Cobalt Service & Repair Manual / Engine Service / Crankshaft Damper R&R

Removal

1. Raise and support vehicle.
2. Remove front tire and wheel assembly.
3. Remove front fender liner.
4. Turn drive belt tensioner clockwise.
5. Remove serpentine drive belt.
6. Prevent crankshaft from rotating by install harmonic balancer holder tool No. J38122A, or equivalent.
7. Remove mounting bolt and crankshaft balancer. Discard bolt.
8. Reverse procedure to install.
    Connecting Rod R&R
    1. Rotate the crankshaft to a position where the connecting rod bolts are the most accessible, Fig. 1. 2. Mark the connecting rod an ...

    Crankshaft Main Bearing Clearance Measure
    Method A 1. Measure the crankshaft bearing journal diameter with a micrometer in several places, 90 degrees apart. Average the measurements. ...

    See also:

    Chevrolet Cobalt Service & Repair Manual. Windshield Wiper Arm, Replace
    Removal 1. Turn ignition ON. 2. Turn wiper switch to DELAY. 3. Turn ignition OFF when wiper arms are paused at bottom of wipe pattern. 4. Remove wiper arm nut cover (1), Fi ...

    Chevrolet Cobalt Owners Manual

    Chevrolet Cobalt Service Manual


    Copyright © 2026 www.cheviguide.com - Chevrolet Auto Manuals - 0.0051