Chevrolet Cobalt Service & Repair Manual: Wiper Switch, Replace

Chevrolet Cobalt Service & Repair Manual / Electrical / Component Replacement / Wiper Switch, Replace

1. Remove steering column trim covers.
2. Remove multi-function switch as outlined in "Multi-Function Switch, Replace."
3. Remove retaining screws, then the wiper switch from column.
4. Disconnect electrical connector.
5. Reverse procedure to install. Torque attaching screws to 36 inch lbs.
    Wiper Motor, Replace
    1. Remove wiper arm assemblies. 2. Disconnect washer tubing from air inlet screen. 3. Remove air inlet grill ...

    Wiper Transmission, Replace
    1. Remove wiper arm assemblies. 2. Disconnect washer tubing from air inlet screen. 3. Remove air inlet grill ...

    See also:

    Chevrolet Cobalt Service & Repair Manual. Stabilizer Bushing R&R
    Refer to Fig. 1 when performing the following procedure. 1. Raise and support the vehicle. 2. Remove front stabilizer shaft clamp bolt. 3. Remove front stabilizer shaft clamp nut. ...

    Chevrolet Cobalt Owners Manual

    Chevrolet Cobalt Service Manual


    Copyright © 2024 www.cheviguide.com - Chevrolet Auto Manuals - 0.0036