Chevrolet Cobalt Service & Repair Manual: Computer Relearn Procedure

Chevrolet Cobalt Service & Repair Manual / Air Conditioning & Heater / General Service / Computer Relearn Procedure

Body Control Module (BCM)

Connect a Tech 2 or suitably programmed scan tool to Data Link Connector (DLC) and follow manufacturer's instructions.

Dash Integration Module (DIM)

Connect a Tech 2 or suitably programmed scan tool to Data Link Connector (DLC) and follow manufacturer's instructions.

Electronic Brake Control Module (EBCM)

Connect a Tech 2 or suitably programmed scan tool to Data Link Connector (DLC) and follow manufacturer's instructions.

Instrument Panel Integration Module (IPM)

Connect a Tech 2 or suitably programmed scan tool to Data Link Connector (DLC) and follow manufacturer's instructions.

Powertrain Control Module (PCM)

Connect a Tech 2 or suitably programmed scan tool to Data Link Connector (DLC) and follow manufacturer's instructions.

Rear Integration Module

Connect a Tech 2 or suitably programmed scan tool to Data Link Connector (DLC) and follow manufacturer's instructions.

Theft Deterrent System Programming

Connect a Tech 2 or suitably programmed scan tool to Data Link Connector (DLC) and follow manufacturer's instructions.
    Charging System
    The J 43600 is a complete air conditioning service center for R-134a. The ACR 2000 recovers, recycles, evacuates and recharges A/C refrigerant quickly, accurately and automatically. ...

    Flushing
    1. Remove expansion tube, if equipped. 2. Remove air compressor. 3. Install flush adapter to air compressor ...

    See also:

    Chevrolet Cobalt Service & Repair Manual. Oil Pan, Replace
    Removal 1. Raise and support vehicle. 2. Drain engine oil into suitable container. 3. Remove engine mount strut bracket. 4. Remove front fender liner. 5. T ...

    Chevrolet Cobalt Owners Manual

    Chevrolet Cobalt Service Manual


    Copyright © 2025 www.cheviguide.com - Chevrolet Auto Manuals - 0.0037