The vehicle's hydraulic brake system is divided into two parts. If one part is not working, the other part can still work and stop the vehicle. For good braking both parts need to be working well.
If the warning light comes on, there is a brake problem.
Have the brake system inspected right away.
United States
Canada
This light should come on briefly when the engine is started. If it does not come on then, have it fixed so it will be ready to warn if there is a problem.
When the ignition is on, the brake system warning light also comes on when the parking brake is set. The light stays on if the parking brake does not fully release. If it stays on after the parking brake is fully released, it means the vehicle has a brake problem.
If the light comes on while driving, pull off the road and stop carefully. Make sure the parking brake is fully released. The pedal might be harder to push or, the pedal could go closer to the floor. It can take longer to stop. Try turning off and restarting the vehicle one or two times, if the light is still on, have the vehicle towed for service. See Towing Your Vehicle.
WARNING:
The brake system might not be working properly if
the brake system warning light is on. Driving with
the brake system warning light on can lead to a
crash. If the light is still on after the vehicle has
been pulled off the road and carefully stopped,
have the vehicle towed for service.
Chevrolet Cobalt Service & Repair Manual. Shock Absorber, Replace
Rear
1.
Raise and support vehicle, then remove
tire and wheel assembly.
2.
Support rear axle with a suitable jack
stand.
3.
Remove upper and lower shock absorber
mounting bolts, then the shock ab ...