Manual Seats
1. Lift the bar to unlock the seat.
2. Slide the seat to the
desired position and
release the bar.
Try to move the seat to be sure it is locked in place.
See Manual Seats.
Seat Height Adjuster
To raise or lower the driver seat, move the lever upward or downward repeatedly until the seat is at the desired height.
See Seat Height Adjuster.
Reclining Seatbacks
To recline the seatback, do the following: 1. Lift the recline lever.
2. Move the seatback to the desired position, then release the lever to lock the seatback in place.
3. Push and pull on the seatback to make sure it is locked.
See Reclining Seatbacks.
Manual Lumbar
If equipped, the lumbar
knob is located on
the front of the driver
seat lower cushion.
Turn it clockwise or
counterclockwise to
increase or decrease
the lumbar support.
See Manual Lumbar.
Heated Seats
Driver's Switch shown
This vehicle may have heated front seats.
The switches are located
on the instrument panel
above the climate control
system.
Press the side of the switch with the double indicator lights to turn the seat to the highest setting.
Press the side of the switch with the single indicator light to turn the seat to the lowest setting.
Return the switch to the center to turn off the heated seat.
See Heated Seats.
Chevrolet Cobalt Owners Manual. Tire Chains
WARNING:
If your vehicle has P195/65R15, P205/55R16,
P205/50R17, or 225/40R18 size tires, do not
use tire chains. They can damage your vehicle
because there is not enough clearance.
Tire chains used on a vehicle without the proper
amount of clearance can cause damage to the
brakes, suspension ...